Connect the corresponding voltage according to the rated voltage of the heating belt, and the line current is sufficient.
Using the length arbitrary interception, directly connected to the 220V power supply through the switch, without the thermostat to control the temperature.
Note: Be sure to close the pipe, no gap (through the air can not play a role in insulation) outside can be used or no longer need to add insulation cotton, depending on the situation. Can overlap and intersect. Its maximum temperature is only 70°C. Single motor moisture-proof heating belt, installed at the end of the drive winding of the motor, double motor moisture-proof heating belt, one installed at the drive end, the other installed at the non-drive end, do not overlap around the stator, tie with polyurethane tape, its leads are fixed in the junction box, and finally the dipping paint drying is completed.
